Как се образуват спирални потопени дъгови заварени тръби?
Spiral submerged arc welded pipes are formed by spirally curling the steel strip into a cylindrical shape and welding the seams using a submerged arc welding process. The steel strip is continuously fed into the former at a certain angle to form a stable spiral angle. During welding, the arc burns under the flux layer to prevent air from contaminating the Weld . Този процес позволява непрекъснато производство, висока ефективност и равномерни заварки ., той е подходящ за производството на тръбопроводи с голям диаметър и на дълги разстояния .
Какви са предимствата на потопеното дъгово заваряване в сравнение с други заваръчни процеси?
Submerged arc welding has a large penetration depth and fast welding speed, which is suitable for the production of thick-walled steel pipes. The flux protects the weld from oxidation and has more stable quality. It has a high℃of automation and reduces human operation errors. The heat input is concentrated, the deformation is small, and the residual stress is Нисък . Той е особено подходящ за непрекъснатите нужди от заваряване на спирални заварени тръби .
Какъв е ефектът от ъгъла на спирално образуване върху работата на тръбата?
The spiral angle is usually 20℃–70℃. The smaller the angle, the stronger the axial load-bearing capacity, but the difficulty of forming increases. A large angle leads to high production efficiency, but may reduce the hoop strength. The angle design needs to be optimized according to the pipe diameter and purpose. A reasonable angle Може да балансира ефективността на формирането и механичните свойства . Общият ъгъл е 45 градуса –60 градуса, което отчита както сила, така и икономика на производството .
Защо спираловидни заварени тръби често се използват за транспортиране на нефт и газ?
Its continuous forming process can produce ultra-long pipelines and reduce the number of welds on site. The high reliability of submerged arc welding is suitable for high-pressure environments. The spiral structure disperses stress and has strong resistance to external pressure. The cost is lower than that of straight seam welded pipes, especially suitable for large-diameter Изисквания . В допълнение, материалът може да бъде коригиран, за да се адаптира към корозивни медии .
Как да контролираме качеството на заварките по време на производството?
The welding current, voltage and speed parameters need to be precisely controlled. The flux composition and particle size affect the stability of the molten pool. Regularly perform X-ray or ultrasonic non-destructive testing. Use an online monitoring system to adjust the process in real time. After welding, a water pressure test and mechanical property spot Изисква се проверка .








